STIHL 1L & 4L MotoMix Pre-Mix Fuel Container (Tin)
Reason the product is recalled
The tin may leak fuel due to a manufacturing defect.
The hazards to consumers
There is a risk of injury including irritation to skin, eyes from the leaked fuel or it can cause drowsiness or dizziness. Risk of death if leaked fuel is swallowed and enters airways. Risk of fire if fuel leaks near a source of ignition.
Affected Products
|
SKU |
APN |
VPN |
DESCRIPTION |
RECALL IDENTIFIER |
|
6307680 |
886661341436 |
7004 874 0102 |
Moto Mix 1 litre 7004 874 0102 |
Manufactured by Perennial |
|
6307698 |
886661341443 |
7004 874 0103 |
Moto Mix 4 Litre 7004 874 0103 |
What consumers should do
-
Whilst handling a leaking tin, ensure you are wearing protective nitrile gloves, full length clothing, boots and glasses/goggles for eye protection.
-
Place the affected tin in a ventilated area away from all sources of ignition.
-
Check whether one of the following dates is printed on the bottom of the tin
-
1 Litre tin dated: 28/02/25 or 15/05/25
-
4 Litre tin dated: 30/11/24 or 11/04/25
-
-
Check the tin for any signs of unexplained fuel leakage, such as green fluid seeping from the top or bottom seam, streaks of green fluid on the sides or bottom of the tin, or a ring of green fluid around the base of the tin.
-
If you find any signs of leakage and one of the above dates is printed on the bottom of the tin, contact STIHL (see below) for assistance and details about a replacement tin or refund
SENCO F35XP Cordless 34-degree Nail Gun
Reason the product is recalled
The nail gun’s firmware may allow a nail to discharge through use of the trigger alone and not via the usual 2 step actuation process.
The hazards to consumers
There is a risk of serious injury if the nail gun discharges unintentionally.
Affected Models
Airco Fasteners Pty Ltd
18V battery powered nail gun supplied with two lithium-ion batteries and a charger.
Affected serial numbers:
• CS23900001to C23999999
• CS23B00001 to C23B99999
• CS24000001to CS2440000
What consumers should do
- Stop using the product immediately. Remove battery and nails from tool.
- Check the serial number of your tool to see if you have an affected product. This can be confirmed via the Airco Brands Recall Web Page (www.aircobrands.com.au/f35xp-nailer-recall).
- Contact Airco Brands Customer Service to arrange for your tool to be transported and repaired at no charge. Do not take your product back to the place of purchase.
STIHL BR 800 C-E Magnum petrol backpack blower
Reason the product is recalled
The fan wheel in affected units may fail, which could result in breakage. This may lead to fragments being ejected from the blower, posing a risk of injury to the operator or bystanders.
The hazards to consumers
Risk of injury from lacerations or cuts if the fan wheel in affected units fails and the operator or a bystander gets hit by ejected fragments.
Affected Models
STIHL BR 800 C-E Z Magnum high powered petrol backpack blower.
Model number: BR 800
| Material Number | Machine | Serial Range | Country of Manufacture |
| 4283-011-1602 | BR 800 C-E Z Magnum | 546297056 –547916107 | United States |
| 4283-011-1605 | BR 800 C-E Z Magnum | 840424772 – 840603164 | China |
What consumers should do
- Stop using affected blowers immediately
- Return affected blowers to an authorised STIHL workshop for a free inspection and repair.
TR50 Brick, Tile and Paver Cleaner & CT82 Concrete and Driveway Cleaner
CT82-5L & TR50-5L
Reason the product is recalled
The child safety cap of this product is not being fitted on properly, which may cause leakage of the product from the top of the bottle during transportation or agitation.
The hazards to consumers
The product is classified as corrosive, may cause severe skin burn or eye damage when contact with skin. The consumer is also be recommended not to breathe in any vapour or mist of the product.
Affected batch number
TR50-5L: 186875, 187222, 187843, 188290, 188775
CT82-5L: 187063, 187853, 188271, 188965
What consumers should do
Please isolate the affected product, ensure it is securely contained to prevent any leaks, and return it to the store where it was purchased.
STIHL 1L & 4L MotoMix Pre-Mix Fuel Container (Tin)
Premixed fuel (98 Octane fuel with 50:1 ratio mix with 2 stroke oil) in 1L & 4L tins. The recall relates to the product’s tin.
Reason the product is recalled
The tin may leak fuel due to a manufacturing defect.
The hazards to consumers
There is a risk of injury including irritation to skin, eyes from the leaked fuel or it can cause drowsiness or dizziness. Risk of death if leaked fuel is swallowed and enters airways. Risk of fire if fuel leaks near a source of ignition.
What consumers should do
- Whilst handling a leaking tin, ensure you are wearing protective nitrile gloves, full length clothing, boots and glasses/goggles for eye protection.
- Place the affected tin in a ventilated area away from all sources of ignition.
- Check whether one of the following dates is printed on the bottom of the tin –
- 1 Litre tin dated: 28/02/25 or 15/05/25
- 4 Litre tin dated: 30/11/24 or 11/04/25
- Check the tin for any signs of unexplained fuel leakage, such as green fluid seeping from the top or bottom seam, streaks of green fluid on the sides or bottom of the tin, or a ring of green fluid around the base of the tin.
- If you find any signs of leakage and one of the above dates is printed on the bottom of the tin, contact STIHL (see linked notice) for assistance and details about a replacement tin or refund.
QUELL FIRESTOP Model: QFS
Sold from Dec 21 to May24
Why the product is recalled: FIRESTOP does not display the required instructions and markings as set out in the applicable mandatory consumer product safety standard.
Hazard: No Known hazards.
What to do:
1. Return product to place of purchase for a full refund.
2. If you are unable to physically return the product or were gifted the product, contact our customer service team.
Fiskars Functional Form Spoon
Product Code 1027299 Batch 191223 only
Sold at Spotlight and Mitre 10 from 1/3/2020 to 10/8/2020
Defect: The spoon may contain primary aromatic amines above the acceptable limit.
Hazard: Potential health risk cannot be excluded as this is a food contact item.
What to do: Consumers should stop using the spoon and return it to the place of purchase for a full refund or to exchange it for the same item manufactured in a different batch.
Contact details: Contact Fiskars by phoning 02 8665 8200 or emailing australia.orders@fiskars.com
Hot Water 135L Hotflo Gas Storage Tank Rinnai NG
Rinnai Australia is undertaking a voluntary national product safety recall on a small batch of gas storage water heaters manufactured during December 2022.
What is the hazard?
An internal gas connection may not be adequately secured. This may cause a small gas leak during operation which will stop the water heater from operating leaving it in a safe condition. Attempts by consumers at re-lighting the burner may result in a flame flash extending beyond the boundary of the access door which presents a risk of injury.
Unit Affected
Name: Hot Water 135L Hotflo Gas Storage Tank Rinnai NG
VPN: GHF4135N
Barcode: 9314109206944
What do you need to do?
If your water heater is affected, visit gasstoragecheck.rinnai.com.au or call Rinnai on 1300 364 559 to arrange for an authorised service technician to conduct a free in-home check on your water heater. If your water heater is operating normally, there is no internal gas leak and you can continue to safely use it until the technician visits you. If your water heater stops operating you must not attempt to re-light the burner until the technician has completed the check. For further details visit gasstoragecheck.rinnai.com.au or call 1300 364 559.
Kincrome Trolley Jacks Labelling Compliance
Due to a labelling concern we need to action a voluntary recall on a number of our Trolley Jacks, some of which have been supplied to customers.
This recall is due to the word ‘Ground’ missing from one of the labels on the lifting arm and although we do not believe that this is a product safety issue, a recall is necessary at this time to ensure that Kincrome meets the requirements of the Consumer Goods (Trolley Jacks) Safety Standard 2017.
The list of affected product SKU’s and batch codes is in the attached recall notice – action items are below.
Kincrome field team will be providing replacement stickers and reworking affected units over the next 2 weeks.
Products affected (specific batches):
- K12060 – 1350kg Trolley Jack (COM 727618 AX 5435722) – Chargeback.
- P12100 – 1350kg Trolley Jack and Stand Bundle – Direct to store.
- K12161 – 1,850kg Trolley Jack (COM 825276 AX 7014244) – Chargeback.
- K12162 – 2,000kg Garage Jack – Direct to store.
- K12168 – 2,000kg Trolley Jack – Direct to store.
Action Items:
- Place recall notice at counter.
- Take a photo of recall notice on counter and send to recalls@kincrome.com.au
- Check all stock on hand against the batch numbers listed on the recall notice.
- Remove from sale and quarantine any affected stock.
- Kincrome field team will rework stock with new sticker.
- Once sticker is applied, stock may be returned to sale.
Gardena AquaCount Water-Meter 18350-20
Digital water flow and consumption meter, with Gardena branding.
Dates sold: 19 July 2023 - 10 August 2023
Why the product is recalled: The products were sold without the warning information that is required for products containing button/coin batteries.
Hazard: There is a risk of choking, severe internal burn injuries or death to young children if they gain access to the button batteries and swallow or insert them. Consumers may be unaware that the product contains a button battery.
Consumers should immediately place the product out of reach of children.
Consumers should contact the place of purchase for a full refund or replacement of the product.
DeWalt and STANLEY FATMAX Fiberglass Sledgehammers
DeWALT Fiberglass Sledgehammers with model numbers DWHT56024, DWHT56025, DWHT56026, DWHT56027, DWHT56029, DWHT56030, DWHT56141, DWHT56142, DWHT56147, DWHT56148. STANLEY FATMAX Fiberglass Sledgehammers with model numbers FMHT56006, FMHT56008, FMHT56009, FMHT56010, FMHT56011, FMHT56019.
Dates sold: 4 August 2014 to 30 May 2023
Why the product is recalled: The head of the sledgehammer may loosen prematurely and detach unexpectedly during use.
Hazard: There is a risk of injury to the user or bystanders if the head detaches during use.
Consumers should immediately cease using the product. Consumers should visit https://www.sledgehammerrecall.expertinquiry.com/ to register for a refund and obtain information about disposing of the product.
Lion Snatch Straps - LA400A10, LA400A7, LA400C6 6PC RECOVERY KIT
Due to a labelling concern, a safety recall on several LION Snatch Straps has been initiated.
Product purchased prior between 01/12/2017 and 30/06/2023 may not comply with the labelling requirements of the mandatory standard 'Consumer Goods (Motor Vehicle Recovery Straps) Safety Standard 2017'. The product could have incorrect labelling &/or missing instructions, which may result in misuse of the product.
Hazard: Incorrect use of a snatch strap could cause severe injury or even death.
What to do: If you have affected stock, contact Lion (Aust) Consolidated P/L via phone 039761 6199
or email sales@lionaust.com.au to discuss options for remediation.
Beaver Lever Blocks Model 3S (250kg and 500kg)
Supplied by Bunzl Brands and Operations Pty Ltd from 1 January 2019 to 19 August 2021. Affected batch numbers: BJT0201; BJT0207; BJT0208; BJT2878; BJT2879; BJT2880; BJT2881; BJT4451.
Defect: Ball Bearings could be missing from the bearing in the Top Hook Assembly, which could cause the top hook to dislodge while load is suspended.
Hazard: If the hook detaches and the load falls, there is the risk of serious injury to the user and bystanders.
What to do: Consumers should immediately stop using the product and check the batch number on the ID plate against the list of affected batch numbers. If the lever block is from one of the batches detailed above either take the product to the nearest Beaver Brands approved testing facility for testing or contact Beaver Brands to make arrangements to return the product for testing.
Product that passes testing will be returned at no cost. A refund or replacement will be provided for product that fails testing.
Product bearing a QC Passed sticker is not affected by this recall.
Contact Details: For further information, please contact Beaver Brands by phone on 02 8882 5838, by email on productrecalls@beaver.com.au or visit the website at www.beaver.com.au
CHEMTECH® CLEAN & EASY MOULD & MILDEW KILLER RANGE - BC36RTU-750M and BC36-950M
ITW has initiated an immediate recall of the Chemtech Clean & Easy Mould & Mildew Killer trigger pack 750 ML and the Chemtech Clean & Easy Mould & Mildew Killer 950 ML due to the potential of leaks from the cap.
Notice of Product Safety Recall from August 2020
GRILLMAN Gas Safety Shut-Off Valve AND GRILLMAN Gas Safety Shut-Off Valve with Hose and Regulator
IDENTIFICATION:
Gas safety Shut Off Valve with POL flitting, suitable for gas barbecues and outdoor gas heaters. Batches GMGSG 2018/01 and GMGSG 2018/03 Sold by caravan, camping, hardware, barbecue and outdoor furnishing stores between March 6th 2018 to July 31st 2020.
DEFECT:
The tail pipe and main body of the valve may come apart, this may cause the seal at this point to break and allow gas to escape when the valve to the gas cylinder is open.
HAZARD:
Risk of leaking gas igniting, leading to burns and/or a fire and/or explosion, which may result in serious injury or death.
ACTION REQUIRED:
Consumers should immediately stop using the products and return them to the place of purchase for a full refund. CONTACT DETAILS: For further information, contact Mayo Hardware on 1300 360 211 or email grillmangas@mayohardware.com.au See www.productsafety.gov.au for Australian product recall information
Notice of Product Safety Recall from December 2019
Description/ Model Number: Makita Model:
5057KB 185mm Dustless Circular Saw. Affected range of serial numbers:
| From | To | From | To | |
| 12541 | 12588 | 13352 | 13375 | |
| 12738 | 12875 | 13406 | 13453 | |
| 12876 | 12929 | 13554 | 13577 | |
| 13028 | 13099 | 13804 | 13899 | |
| 13100 | 13123 | 14002 | 14049 | |
| 13258 | 13305 |
Recall Information:
In the interest of user safety, Makita Australia Pty Ltd is undertaking a safety recall of Makita Circular Saw model 5057KB forreplacement of Saw
Base Defect:
When cutting at a 45 degrees angle, the blade cover does not open fully. If it is forced open by the operator the blade cover may become stuck and expose the spinning blade.
Hazard:
An exposed blade during use poses a serious injury risk.What to do: Check model and serial number of your saw (see the illustration below ). If the model and serial number of your saw is within the affected range – stop using the saw immediately.
Contact Details:
Contact Makita on 1300361690 between 8am and 5pm weekdays to arrange repair by the nearest Makita Service Agent at no charge.Makita has been directed to request that this recall notice and information is placed on your website for 6 months.Link to
Notice of Product Safety Recall from January 2015
A product safety recall of the product below was advertised on28 January 2015. It is reproduced again to bring to the attention of consumers as requested by the ACCC.
Description/ Model Number:
MIPRO 1.8M DUAL PURPOSE ALUMINIUM LADDERAPN/
Barcode:
9329992001378
Recall Information:
As a precaution, Mitre 10 is conducting a recall for this product sold exclusively in Mitre 10 and True Value Hardware stores nationallyprior to 28 January 2015.
Hazard:
Labelling on the ladder indicates that the Ladder complies with AS/NZS 1892.A test indicates that the ladder does not comply with that Australian Standard.
Defect description:
The ladder may not have the attributes required by the Australian Standard with which it purports to comply, including safety attributes.
What To Do:
We recommend that customers cease use of the ladder immediately and return it to their local Mitre 10 or True Value Hardware store for a full refund of the purchase price. A similar ladder sold after the above date with a yellow coloured top and a different barcode is not the subject of the recall and should not be returned.
Contact Details:
Mitre 10 Australia Pty Ltd ACN 009 713 704 of 19 Corporate Drive Heatherton Victoria 3202. Phone: 1300 880 440.www.mitre10.com.au
